Carbon steel pipes have a variety of uses due to their strength and the fact that they require little maintenance. They are often used to transport natural gas and water to rural and urban areas, or to protect power lines and pipelines that carry high-pressure steam and air. In addition, carbon steel pipes are used in the oil and petroleum industry for transporting large quantities of oil through remote areas.
Other uses of carbon steel pipe include gas distribution inside and outside the home, water wells and sewage systems. However, carbon steel pipes are never used to transport drinking water because they tend to corrode in water and because minerals in the pipe can dissolve into the water and clog the pipe.
Steel pipes are produced by two different methods, which ultimately result in either welded or seamless steel pipes. In both methods, raw steel is first cast into a more workable initial form. It is then made into a tube by stretching the steel into a seamless tube or by pressing the edges together and sealing them with a welded seam. The earliest method of producing tubes was introduced in the early 1800s and has steadily evolved into the modern process it is today.
Millions of tons of tubes are produced each year. Its versatility has made it the most commonly used product in the steel industry. Steel pipes can be found in many places. Because they are strong, they are used underground to transport water and natural gas in cities and towns. They are also used in buildings to protect electrical wires. The interesting thing about steel pipes is that they are both strong and lightweight. This makes them ideal for use in bicycle frame construction. Steel pipes can also be found in automobiles, refrigeration units, heating and plumbing systems, flagpoles, street lights and medicine. Pipes have been used for thousands of years. The first use may have been by ancient agronomists to bring water from rivers and streams into the fields.
The development of modern welded steel pipes dates back to the early 1800's. In 1815, William Murdoch invented the coal-fired lamp system. To fill the entire city of London with these lamps, Murdoch joined together the barrels of discarded muskets and used this continuous pipe to transport the gas. When his lighting system proved successful, the demand for long metal tubes became even greater. In order to produce enough tubes to meet this demand, a series of inventors began working on developing new tube manufacturing processes. As early as 1824, James Russell was granted a patent for a remarkable method of producing metal tubes quickly and cheaply. In this method, he made metal tubes by joining opposing edges of a strip of flat iron together. The metal is first heated until it is ductile. The edges are then folded together and welded using a drop hammer. The tube is finished by passing it through a slot and rolling mill.
Russell's method did not last long, however, because over the next year Comenius Whitehouse developed a better method of manufacturing metal tubes. Known as the butt-welding process, his process is the basis for today's pipe manufacturing procedures. In this method, a thin sheet of iron is heated and pulled through a tapered opening. As the metal passes through the opening, its edges curl and form a tube shape. The two ends are welded together to complete the pipe. The thin sheet of iron is heated and pulled through the tapered opening. As the metal is pulled through the opening, its edges curl and form a tube. The two ends are welded together to complete the tube. A thin sheet of iron is heated and pulled through a tapered opening. As the metal is pulled through the opening, its edges curl and form a tube. The two ends are welded together to complete the pipe.
The welded pipe is formed by forming the material into a circle by passing the strip through a series of slotted rolls. Next, the unwelded pipe is passed through welding electrodes. These devices seal the two ends of the pipe together. This process began in the United States in 1832 in Philadelphia. Gradually, there were some improvements to the Whitehouse method, and John Moon introduced one of the most important innovations in 1911. He introduced the continuous process method, in which a manufacturing plant could produce a continuous flow of pipes. He built machines for this specific purpose, which were adopted by many pipe manufacturing plants. Along with the development of the welded pipe process, the demand for seamless metal pipes emerged.
Until now, welded steel pipes and seamless steel pipes are widely used in many industries. UNITED as a carbon steel welded pipes supplier, offers galvanized malleable iron pipe fittings and welded steel pipe fittings, and other relative steel iron products, please contact us now and don't hesitate!